|
| |
Multi-Spindle Rotary
Tables
SUDX & EUDX
|
We offer 2 &
3 Spindle Rotary Models:
- Excellent for reducing overall
machining time. Fewer tool changes and more "In the Cut"
time, producing more parts per hour.
- Table sizes range from 130 mm
(5.12") to 280 mm (11.02").
- High Torque servo drives provide
the power necessary to move even 3 spindle units with ease .
- Class "A" tapered
roller bearings allow each spindle to move freely, even with tailstock pressure
applied.
- Uses a single controller to
operate both Spindles.
- Has the same quality features
and accessories as our Single Spindle models.
- Can be supplied as 4th Axis
upon request with standard AC drives {Fanuc, Yasnack, Mitsubishi,
etc.}
|
Inch (mm)
|
MODEL
SUDX / EUDX |
130-2 |
130-3 |
140-2 |
140-3 |
170-2 |
170-3 |
220-2 |
220-3 |
280-2 |
|
Sub Table OD |
5.12 (130) |
5.51 (140) |
6.69 (170) |
8.66 (220) |
11.02 (280) |
|
Bore ID |
1.18
(30) |
0.98
(25) |
1.65
(42) |
1.65
(42) |
1.65
(42) |
|
Threaded ID |
N/A |
M20 P2.5 |
M36 P3.0 |
M36 P3.0 |
M36 P3.0 |
|
Center Height |
5.12 (130) |
5.51 (140) |
6.30 (160) |
7.87 (200) |
9.06 (230) |
|
Max RPM |
75 |
62 |
41.6 |
33.3 |
16.6 |
|
Rotary Torque |
|
ft/lbs. (kg/m) |
|
SUDX |
60 (8) |
50 (7) |
70 (9) |
60 (8) |
90 (12) |
80 (11) |
150 (21) |
120 (16) |
300 (41) |
|
EUDX |
80
(11) |
72
(10) |
101 (14) |
94 (13) |
145 (20) |
130
(18) |
252 (35) |
202 (28) |
500 (69) |
|
Brake Torque ft/lbs (kg/m) |
40 (5) |
65 (9) |
110 (15) |
180 (25) |
325 (45) |
|
Resolution (deg) |
0.00075" |
0.000625" |
0.0005" |
0.00025" |
|
Max Load Horizontal
Table Position lbs (kg) |
66 (30) |
110 (50) |
180 (80) |
260 (120) |
400 (180) |
|
Max Load Vertical
Table Position lbs (kg) |
33 (15) |
55 (25) |
90 (40) |
130 (60) |
200 (90) |
|
Positioning Accuracy |
+/- 30 Seconds |
|
Spindle Thru Hole Diameter in
(mm) |
1.44 (36.5) |
1.26 (32) |
1.77 (45) |
2.50 (63.5) |
3.54 (90) |
|
Net Weight lbs (kg) |
156 (71) |
233 (106) |
174 (79) |
260 (118) |
266 (121) |
400 (182) |
442 (201) |
653 (297) |
693 (315) |
|
|
Standard
Accessories |
Optional
Accessories |
- UDNC-100 Controller (SUDX), UDNC-500 (EUDX)
- Remote Cable (for M-Code interface, 15
ft)
- Power Cord: 105 ~ 125 VAC (SUDX) 200 ~225
VAC Single Phase (EUDX)
- T-Slotted face plates {1 per spindle}
(removable)
- Operators Manual, PC Software, Locating
Keys, & Warranty Card.
|
- Hand Wheels (SPG-100 or LPG-200)
- Hand Held Computer Terminal (HCT-001 or HCT-002)
- Remote Quill Switch for Manual Mills (RSQ-100)
- Terminal Interface cable for HCT (TIC-002)
- Collet, Accu and Lathe Chucks, etc.
- Tailstocks, Vises, and Trunion Fixtures.
|
Left
Handed Motor mounted models are available upon request! |
(c) 1998, 1999, 2000 Yuasa
International
|
|
