 Ordering
Information:
- Select collet pad series from table below using
machine information or manufacturer's part number cross
reference.
- Use information in sidebar to formulate Superior's
part number.
|
|
Super-GripTM
Bidirectional Serration
Specifically designed for NC turning centers,
Superior's Super-GripTM bidirectional collet
pads feature serration lands which penetrate the work for a
positive gripping action. This unique and exclusive pyramid
configuration provides equal gripping force along the spindle
axis in both forward and reverse spindle rotation. It also
assures smooth bar feeding while precluding "push back"
resulting from the cutting forces. Super-GripTM
collet pads are ideally suited for exotic or hard materials
such as inconel, stainless...and many others. |
|
Superior Series Number |
Capacity (in) |
Warner and Swasey
Machine |
Warner and Swasey Number |
Hardiinge Number |
Somma Balas Number |
|
1027 |
Rd. 1-1/2 Hex. 1-5/16 Sq. 1-1/16 |
#2, #3, #4,1-1/2" #2EC, 16"EC |
461 |
5835 5845 |
2023 |
|
1025 |
Rd. 2 Hex.
1-3/4 Sq. 1-3/8 |
#4,2" #3,1-3/4" |
1129 |
5839 5841 |
2064 |
|
1026 |
Rd. 2-1/2 Hex.
2-3/16 Sq. 1-3/4 |
#5, 1A |
471 |
5843 5845 |
2049 |
|
1024 |
Rd. 3-1/4 Hex.
2-3/4 Sq. 2-3/8 |
1A,3" 2A,3-1/2" |
404 |
5845 |
2096 |
|
1022 |
Rd. 3 Hex. 2-5/8
Sq. 2-1/8 |
#5,3" |
4669 |
--- |
2339 |
|
1023 |
Rd. 4-1/2 Hex.
3-7/8 Sq. 3-3/16 |
#5,4-1/2" |
2779 |
MP-2623 |
2204 |
|
1018
(3-Spit
1023) |
Rd. 4-1/2 Hex. 3-7/8 Sq. 3-3/16 |
--- |
--- |
--- |
--- |
|
1021 |
Rd. 4-1/12 Hex.
3-3/16 Sq. 3-3/16 |
2A,4-1/2" 3A,4-1/2" |
533 |
--- |
2226 |
|
1014 |
Rd. 6 Hex.
5-3/16 Sq. 4-1/2 |
3A,6" |
1959 |
--- |
2230 |
|
Turret Lathe
Pads
Identified by the largest diameter being in the
middle separating two ground diameters of equal size. Threaded holes
in the periphery of the middle diameter are used to secure the pads
to the master collet. These pads were originally used on turret
lathes, thus their name. Today, turret lathe pads are commonly used
with collet chucks and collet pad top jaws.
Pros:
- Readily available from several
manufacturers.
- Ideal design for collet pad top jaws.
Cons:
- Sometimes required to remove master collet
to change pads.
Explanation of Superior Part
Numbers
Superior part numbers are in the
form:
XXXX-XXX-XXXX
The first four digits represent
the series number. The middle three describe the ID as follows:
200 - Round Smooth
201 - Round Serrated
202 - Hex Smooth
203 - Square Smooth
204 - Hex Serrated
205 - Square Serrated
206 - Soft Emergency
The last four digits represents
the size number which can be determined by multiplying the decimal
equivalent of the size in inches by 1000.
For example,
1026-203-1250
is a 1-1/4", square smooth, series 1026 collet pad.
|
|
|
|
