ONE STOP WORKHOLDING
CHUCK JAWS AND TURNING TOOLS
Tapered Replaceable Grippers
 |
 |
|||||||
| Part Number |
A | B | C | D | Center Drill |
Thread E |
Drill Diameter |
Type |
| 23801 | 5/16 | 0.093 | 0.32 | 0.19 | 4 | 8-32 | .310 | Serrated |
| 23802 | 1/2 | 0.125 | 0.46 | 0.25 | 6 | 1/4-28 | .498 | Serrated |
| 23803 | 3/4 | 0.187 | 0.7 | 0.38 | 8 | 3/8-16 | .745 | Serrated |
| 23811 | 5/16 | 0.093 | 0.32 | 0.19 | 4 | 8-32 | .310 | Pointed |
| 23812 | 1/2 | 0.125 | 0.46 | 0.25 | 6 | 1/4-28 | .498 | Pointed |
| 23813 | 3/4 | 0.187 | 0.7 | 0.38 | 8 | 3/8-16 | .745 | Pointed |
| 23822 | 1/2 | .125 | .46 | .25 | 6 | 1/4-28 | .498 | Carbide |
| 23823 | 3/4 | .187 | .7 | .38 | 8 | 3/8-16 | .745 | Carbide |
Jergens introduces a new concept in replaceable grippers. It is now easier to modify soft top jaws, strap clamps, or fixtures to hold irregularly shaped material. The grippers can be installed from one side, using a combination center drill, a tap, and a box wrench. There is no need to drill through holes from difficult to reach locations. Simply drill, tap, and install.
Material: 8620
Finish: Black Oxide
Heat Treat: Case Hardened
Available in FixtrueProTM Design Software and PartSpec CDCarbide Insert:
Material: Body 8620 Insert, Carbide
Finish: Zinc Plate
Available in FixtureProTM Design Software and Part Spec CD