4th Axis Table

CNC400V

Specification:


For the machine with splash guard. Vertical use only

 
Item \ Code No. CNC400V
Diameter of Table  ømm 400
Diameter of Spindle Hole ømm ø80H7
Center Height mm 230
Width of T Slot mm 14+0.018
Clamping System   Air/Hyd
Clamping Torque kgf.m 70/180
Table Inertia at Motor Shaft kg.cm.sec² 0.07
Servo Motor rpm €12-1500
Pulse Coder ppr 2000
Minimum Increment   0.001°
Rotation Speed rpm 16.6
Total Reduction Ratio   1/90
Indexing Accuracy sec 15
Net Weight kg 240
Max. Workload on Table - Vertical kg 250
Max. Workload on Table - Horizontal kg 500
Max. thrust load applicable on Table kgf 3200
Max. thrust load applicable on Table F x L kgf.m 119
Max. thrust load applicable on Table F x L kgf.m 400
Max. Work Inertia kg.cm.sec² 65.3
Driving Torque kgf.m 43
- ( ) indicates Z series.
*L type (left-hand mounted motor) is available for all tables.
*AWC system is available for all tables.
*For big bore and rotary joint.
*Ultra precision type is available for all tables, ±3" or ±5".
*For CNC320V, 400V, 321, 401, Ultra heavy duty type is available.
 The continuous cutting ability is 5 times compared with standard type.
*Alpha 6 motor can be mounted on CNC200 and 250.
*For CNC320V and 400V, hydraulic clamping system is also available.
 Please specify 1 port or 2 ports when ordering.
*The supplied hydraulic pressure is 35kgf/cm^2 for hydraulic clamping system.
*For CNC320V and 400V, total reduction ratio of 1/120 is also available.
*Air hydraulic unit for hydraulic brake system is available for the machine without hydraulic source.