4th Axis Table

CNC321/CNCZ321
CNC401/CNCZ401

Specification:

 
Item \ Code No. CNC321
CNCZ321		 CNC400V
CNCZ401
Diameter of Table  ømm 320 400
Diameter of Spindle Hole ømm ø105H7 ø105H7
Center Height mm 230 230
Width of T Slot mm 12+0.018 14+0.018
Clamping System   Hyd Hyd
Clamping Torque kgf.m 180 180
Table Inertia at Motor Shaft kg.cm.sec² 0.029 0.029
Servo Motor rpm €12-1500 €12-1500
Pulse Coder ppr 2000 2000
Minimum Increment   0.001° 0.001°
Rotation Speed rpm 16.6 (33.3) 16.6 (33.3)
Total Reduction Ratio   1/90 (1/45) 1/90 (1/45)
Indexing Accuracy sec 15 15
Net Weight kg 200 225
Max. Workload on Table - Vertical kg 250 250
Max. Workload on Table - Horizontal kg 500 500
Max. thrust load applicable on Table kgf 3200 3200
Max. thrust load applicable on Table F x L kgf.m 119 119
Max. thrust load applicable on Table F x L kgf.m 400 400
Max. Work Inertia kg.cm.sec² 65.3 (32.6) 65.3 (32.6)
Driving Torque kgf.m 43 (34) 43 (34)
- ( ) indicates Z series.
*L type (left-hand mounted motor) is available for all tables.
*AWC system is available for all tables.
*For big bore and rotary joint.
*Ultra precision type is available for all tables, ±3" or ±5".
*For CNC320V, 400V, 321, 401, Ultra heavy duty type is available.
 The continuous cutting ability is 5 times compared with standard type.
*Alpha 6 motor can be mounted on CNC200 and 250.
*For CNC320V and 400V, hydraulic clamping system is also available.
 Please specify 1 port or 2 ports when ordering.
*The supplied hydraulic pressure is 35kgf/cm^2 for hydraulic clamping system.
*For CNC320V and 400V, total reduction ratio of 1/120 is also available.
*Air hydraulic unit for hydraulic brake system is available for the machine without hydraulic source.