4th Axis Table

CNC1200

Specification:
Item \ Code No. CNC1200
Diameter of Table  ømm 1200
Diameter of Spindle Hole ømm ø300H7
Center Height mm Horizontal
Only
Width of T Slot mm 22+0.021
Clamping System   Hyd
Clamping Torque kgf.m 1000
Table Inertia at Motor Shaft kg.cm.sec² 0.11
Servo Motor rpm €22-1500
Pulse Coder ppr 2000
Minimum Increment   0.001°
Rotation Speed rpm 5.5
Total Reduction Ratio   1/360
Indexing Accuracy sec 15
Net Weight kg 1300
Max. Workload on Table - Vertical kg -
Max. Workload on Table - Horizontal kg 5000
Max. thrust load applicable on Table kgf 36800
Max. thrust load applicable on Table F x L kgf.m 1560
Max. thrust load applicable on Table F x L kgf.m 7800
Max. Work Inertia kg.cm.sec² 5500
Driving Torque kgf.m 172
- ( ) indicates Z series.
*L type (left-hand mounted motor) is available for CNC500V, CNC600V, CNC501 and 601.
*For big bore and rotary joint.
*Ultra precision type is available for all tables, ±3" or ±5".
*Ultra heavy duty type is available for all tables.
 The continuous cutting ability is 5 times compared with standard type.
*Alpha22 motor can be mounted on CNC50, 601, 801, 500V and 600V.
*For CNC500V and 600V, hydraulic clamping system is also available.
 Please specify 1 port or 2 ports when ordering.
*The supplied hydraulic pressure is 35kgf/cm^2 for hydraulic clamping system.
*For CNC501 and 500V, total reduction ratio of 1/180 is also available.
*Air hydraulic unit for hydraulic brake system is available for the machine without hydraulic source.