TOLL FREE 1-888-869-2424
¡@ V

SERIES

 3-JAW WEDGE TYPE NON THROUGH-HOLE POWER CHUCK (WITHOUT ADAPTOR)
  1. Direct mounting : Direct mount gor VA series chucks onto short taper spindles of ASA and JIS standards.
  2. High preformance : Simlar high preformance to N series.
  3. Chuck mounting screws : Metric or UNC socket head cap screws are supplied for bolting the chuck to the spindle.
  4. Alternative spindle adaptors : ASA or DIN adaptors can be supplied to fit machine spindle.

DIMENSIONS:

Model \ Dim V-206 V-208 V-210 V-212 V-215
A 165 210 254 304 381
B 74 85 89 106 114
K(H6) 140 170 220 220 300
M 5 5 5 6 6
C 104.78 133.35 171.45 171.45 235
P 21 25 34 34 -
L 6- M10 6- M12 6- M16 6- M16 6- M20
N 14 20 18 22 29
F 20 25 30 30 43
Q max. 37.8 46.3 51.1 61 77.5
Q min. 33.55 41.9 46.7 55.75 69.5
E max. 18 22.5 37.5 47 50.25
E min. 7.5 9 10.5 11 23.25
H max. 104.6 132 158 163 104
H min. 84.6 111 133 133 69
R 31 35 40 50 50
S 12 14 16 18 25.5
I 36 36 36 36 55
J M16X2.0 M20X2.5 M20X2.5 M20X2.5 M30X3.5
G 4 5 5 5 2
O 34 38 45 50 60

SPECIFICATIONS:

Model \ Dim V-206 V-208 V-210 V-212 V-215
Jaw Stroke (mm) 9.2 9.7 8.8 10.5 16
Plunger Stroke (mm) 20 21 25 30 35
Max. Gripping range 165 210 254 10.6 10.6
Min. Gripping range 18 12 16 18 68
Max. Pull Force (kgf) 1835 2549 2957 4181 8362
Max. Gripping Force (kgf) 5253 7548 10913 15807 25391
kgf.cm2 25.5 24.5 28.6 27.5 30.6
Max. Speed (r.p.m) 5000 4000 3500 3000 2800
Weight (kg) 12 28.8 34.4 59 100.6
Moment of Inertia I (kgf-m2) 0.045 0.137 0.3 0.725 1.8
Matching Cylinder MH100 MH125 MH125 MH150 MH200
Matching Hard Jaw HJ06 HJ08 HJ10 HJ12-1 HJ15-1
Matching Soft Jaw HC06 HC08 HC10 HC12-1 HC15-1

STRONG PRODUCT INDEX
MASTER PRODUCT INDEX
HOME