ONE STOP WORKHOLDING
CHUCK JAWS AND TURNING TOOLS
Square Hole Tool Bit Sleeves
 |
 |
||||||
| Part
Number |
Tool Bit Size | A | B | C | D | E | |
| 14611 | 3/16 | 0.1915 | 1-1/2 | .3125 | 7/16 | 1/4-28 | |
| 14612 | 1/4 | 0.255 | 2 | .4375 | 1/2 | 5/16-24 | |
| 14613 | 5/16 | 0.3175 | 2-1/4 | .5000 | 9/16 | 3/8-24 | |
| 14614 | 3/8 | 0.38 | 2-1/2 | .5937 | 5/8 | 1/2-20 | |
| 14615 | 7/16 | 0.4425 | 2-5/8 | .6875 | 5/8 | 1/2-20 | |
| 14616 | 1/2 | 0.505 | 2-3/4 | .7812 | 5/8 | 5/8-18 | |
| 14617 | 5/8 | 0.63 | 3-1/4 | .9375 | 1 | 3/4-16 | |
| 14618 | 3/4 | 0.755 | 4 | 1.1250 | 1 | 1-174 | |
| 14619 | 7/8 | 0.88 | 4 | 1.3125 | 1-1/4 | 1-14 | |
| 14620 | 1 | 1.008 | 5 | 1.5000 | 1-1/2 | 1 1/8-12 | |
Material: Low Carbon Steel
O.D. Ground Concentric with Hole
Set Screw Supplied
Concentricity .005
A convenient method to make your own special tools that utilize square tool bits. All that is required are properly positioned reamed holes to hold the Jergens Square Hole Sleeves. Sleeves are threaded in the end to allow for adjustment of tool bits by the use of set screws.
Application
Jergens Table of Contents
Master Table of Contents