sjveinfo

Sjveerk1.jpg (12961 bytes)

Sjveerk2.jpg (12908 bytes)

Vertical "Vee" Jaw has matching "Vees" at opposite ends, and one large " Vee" in the center. This design can double your production by gripping two pieces at a time. Additionally, tapped holes are provided in the bottom of "Vees" to accommodate end stops provided with the jaw. Jaws are heat treated (Pc54/58) and precision ground for years of reliable use.

*Sets contain 1 Vee Jaw, 1 Rock Jaw, End Stops and Screws.

Horizontal "Vee" Jaws

Hold Round Pieces From .060 to 4-1/8

horiznv.JPG (13395 bytes)

horiznv2.JPG (14735 bytes)

For tool room or production. Heat treated (Pc54/58) and precision ground, these horizontal "Vee" Jaws are ideal for drill cross holes, milling keyways, ect. Tapped holes in the bottom of the "Vee's" accommodate end stops provided with the jaws. Additionally, WORKSTOP (shown in pictures) are included in every horizontal "Vee" jaw set.

Sets contains 1 Vee Jaw, 1 Rock Jaw, End Stops and Screws.

Series	Order Number	Capacity
4 Inch	4RHJ-150	.06" to 1-1/8"
4 Inch	40HV-150	3/4" to 2-1/2"
6 Inch	6RHJ-150	1/16" to 1-1/8"
6 Inch	60HV-150	1" to 3-1/8"
8 Inch	8RHJ-150	1" to 3"
8 Inch	80HV-150	1-1/2" to 4-1/8"

Series	Order Number	Capacity
4 Inch	4MVJ-250	.050" to 1"
4 Inch	40VV-250	3/4" to 4"
6 Inch	6MVJ-250	1/8" to 1-1/8"
6 Inch	60VV-250	1" to 6"
8 Inch	8MVJ-250	1" to 8"

Rock Jaws Hardened and Ground
4 INCH SERIES	6 INCH SERIES	8 INCH SERIES
4RJS-150	6RJS-250	8RRJS-300
3/4 x 1-1/2 x 4	1 x 2-1/2 x 6	1 x 3 x 8