TOLL FREE 888-869-2424
TOLL FREE 888-869-2424
Quad-Bearing Live Centers With Expanded-Range Carbide-Tipped Point
Royal Quad-Bearing Live Centers With Expanded-Range Carbide-Tipped Point
| TAPER | A | B | C | D | E | F | G | H | MAX SUGGESTED RPM* |
WEIGHT
OF WORKPIECE (lbs.) |
THRUST LOAD (lbs.) |
COMPARATIVE LOAD RATINGS (lbs.) |
CATALOG
NO. |
| 2 MT | 2 9/16" | 1 3/4" | 2 13/16" | 5 13/16" | 1 15/16" | 1 1/16" | 7/8" | 3/4" | 3,500 | 245 | 1,270 | 1,515 | 10432 |
| 3 MT | 3 3/16" | 1 3/4" | 3 7/16" | 6 7/16" | 1 15/16" | 1 1/16" | 7/8" | 3/4" | 3,500 | 245 | 1,270 | 1,515 | 10433 |
| 4 MT | 4 1/16" | 2 1/2' | 4 7/16" | 8 5/8'' | 2 11/16" | 2 11/16" | 1 1/4" | 1 1/4'' | 3,000 | 1,365 | 2,150 | 3,515 | 10434 |
| 5 MT | 5 3/16" | 2 1/2" | 5 9/16" | 9 3/4" | 2 11/16" | 2 11/16" | 1 1/4" | 1 1/4" | 3,000 | 1,365 | 2,150 | 3,515 | 10435 |
Technical Information:
Bearings protected by combinatin steel shield and neoprene seal.
Three matched angular contact bearings support the primary load area of the point.
Low-profile head for tool clearance.
Hardened body for extra strength, extra rigidity, and long life.
Reduced knockout diameter prevents taper from mushrooming.
Locknut to maintain factory-set preload.
Heat-treated, high carbon alloy steel point with oversized carbide tip for longer wear..
Spindle-like point extends into shank where it is supported by a needle roller bearing, increasing rigidity, reducing point deflection, and dampening vibration.
Excellent for grinders, manual lathes, and CNC lathes.
Accuracy and rigidity are maintained over a longer period of time under heavy use.
+ 0.0001" TIR guaranteed.
Expanded-range carbide tips extends point life for low thrust/high RPM applications.
The oversized tip may eliminate the need for special live centers because it can fit larger center holes and small tube I.D.'s.
To Royal
Products Table of Contents
Master Table of Contents
Home