TOLL FREE 888-869-2424
TOLL FREE 888-869-2424
Quad-Bearing Live Centers With Carbide-Tipped Point
Royal Quad-Bearing Live Centers With Carbide Tipped-Point
| TAPER | A | B | C | D | E | F | G | H | MAX SUGGESTED RPM* |
WEIGHT
OF WORKPIECE (lbs.) |
THRUST LOAD (lbs.) |
COMPARATIVE LOAD RATINGS (lbs.) |
CATALOG
NO. |
| 2 MT | 2 9/16" | 1 3/4" | 2 13/16" | 5 9/32" | 1 7/16" | 1 1/32" | 7/8" | 3/8" | 3,500 | 245 | 1,270 | 1,515 | 10422 |
| 3 MT | 3 3/16" | 2 3/8" | 3 7/16" | 6 13/32" | 1 3/4" | 1 1/4" | 1" | 3/8" | 3,500 | 245 | 1,270 | 1,515 | 10423 |
| 4 MT | 4 1/16" | 2 3/4' | 4 7/16" | 7 7/8'' | 1 31/32" | 1 1/2" | 1 1/4" | 1/2'' | 3,000 | 610 | 2,150 | 2,760 | 10424 |
| 5 MT | 5 3/16" | 3 1/2" | 5 9/16" | 10 1/4" | 2 13/16" | 1 7/8" | 1 1/2" | 1/2" | 3,000 | 610 | 2,150 | 2,760 | 10425 |
Technical Information:
Bearings protected by combinatin steel shield and neoprene seal.
Three matched angular contact bearings support the primary load area of the point.
Low-profile head for tool clearance.
Hardened body for extra strength, extra rigidity, and long life.
Reduced knockout diameter prevents taper from mushrooming.
Locknut to maintain factory-set preload.
Heat-treated, high carbon alloy steel point.
Spindle-like point extends into shank where it is supported by a needle roller bearing, increasing rigidity, reducing point deflection, and dampening vibration.
Excellent for grinders, manual lathes, and CNC lathes.
Accuracy and rigidity are maintained over a longer period of time under heavy use.
+ 0.0001" TIR guaranteed.
Carbide tips extends point life for low thrust/high RPM applications.
To Royal
Products Table of Contents
Master Table of Contents
Home