ONE STOP WORKHOLDING
BALL LOCK AND LITE LOCK MOUNTING SYSTEMS
Ball Lock Primary and Secondary Liners
|
|||
| Part Number |
Plate
Thickness +-.005 |
Shank Diameter (mm) |
Liner O.D. +.0000 -.0004 |
| 49705 | .50 | 13 | 0.7518 |
| 49706 | .75 | 13 | 0.7518 |
| 49707 | .50 | 16 | 1.0018 |
| 49708 | .75 | 16 | 1.0018 |
| 49701 | .75 | 20 | 1.3772 |
| 49702 | 1.00 | 20 | 1.3772 |
| 49711 | .75 | 25 | 1.3772 |
| 49712 | 1.00 | 25 | 1.3772 |
| 49721 | .75 | 30 | 1.7523 |
| 49722 | 1.00 | 30 | 1.7523 |
| 49731 | .75 | 35 | 1.7523 |
| 49732 | 1.00 | 35 | 1.7523 |
| 49733 | 1.50 | 35 | 1.7523 |
| 49734 | 2.00 | 35 | 1.7523 |
| 49741 | .75 | 50 | 2.5025 |
| 49742 | 1.00 | 50 | 2.5025 |
| 49743 | 1.50 | 50 | 2.5025 |
| 49744 | 2.00 | 50 | 2.5025 |
Locating repeatability will determine if one primary and one secondary or two primary liners are needed. With two primary liners, repeatability of +/- .0005'' can be maintained if the two holes for receiver bushings are held to a centerline distance of +/- .0002'' tolerance.
Material: 52100
Rc 62- 64
Ball Lock Secondary Liners
Jergens Table of Contents
Master Table Of Contents
Home
