ONE STOP WORKHOLDING
BALL LOCK AND LITE LOCK MOUNTING SYSTEMS
Ball lock Face Mount Receiver Bushings
|
|
|||||||
| Part Number |
Shank
Diameter Dia. (mm) |
Actual O.D. +.0000 -0.0004 |
Clearance Drill Diameter |
Bore +.0005 -.0000 |
Depth +.002 -.000 |
Tap Size & Depth |
Bolt
Circle Diameter 3 PL Equally Spaced |
Min. Subplate Thickness |
| E | F | G | H | D | ||||
| 49506 | 13 | 1.3750 | 11/16 | 1.3750 | .469 | 8-32 x 5/16 | .984 | 3/4 |
| 49507 | 16 | 1.4370 | 13/16 | 1.4370 | .469 | 8-32 x 5/16 | 1.125 | 3/4 |
| 49501 | 20 | 1.6873 | 13/16 | 1.6873 | .637 | 10-32 x 3/8 | 1.362 | 1-1/8 |
| 49502 | 25 | 2.0623 | 1 | 2.0623 | .799 | 1/4-28 x 1/2 | 1.644 | 1-1/4 |
| 49503 | 30 | 2.2654 | 1-3/16 | 2.2654 | .871 | 1/4-28 x 3/4 | 1.876 | 1-1/4 |
| 49504 | 35 | 2.6873 | 1-9/16 | 2.6873 | .904 | 5/16-24 x 7/8 | 2.178 | 1-3/8 |
| 49505 | 50 | 3.4998 | 2-5/32 | 3.4998 | 1.239 | 3/8-24 x 1 | 2.916 | 1-13/16 |
Two styles of receiver bushings are
available. Generally, the face mount receiver bushing is utilized in blind hole
applications (Slip Fit). The back mount receiver bushing is used in through hole
applications (Light Press Fit).
NOTE: Installed bushings should be approximately .012'' below subplate
surface.
