astgmd1.gif (2485 bytes)

ONE STOP WORKHOLDING
jrgnlogo.gif (7521 bytes)
BALL LOCK AND LITE LOCK MOUNTING SYSTEMS

Ball Lock Back Mount Receiver Bushings

backmont.gif (6983 bytes)


backmnt2.gif (7945 bytes)
Part
Number		 Shank Diameter
Dia.
(mm)		 Actual
O.D.
+.0000
-0.0004		 Depth
+.000
-0.0004		 C-Bore
+-.006		 Min.
Subplate
Thickness
A B C D
49516 13 0.787 0.277 1.000 3/4
49517 16 0.876 0.285 1.155 3/4
49511 20 1.095 0.345 1.280 7/8
49512 25 1.3763 0.416 1.593 1
49513 30 1.6264 0.432 1.906 1-1/4
49514 35 1.8764 0.493 2.155 1-5/16
49515 50 2.6269 0.621 2.988 1-3/4

Two styles of receiver bushings are available.  Generally, the face mount receiver bushing is utilized in blind hole applications (Slip Fit).  The back mount receiver bushing is used in through hole applications (Light Press Fit).

NOTE:  Installed bushings should be approximately .012'' below subplate surface.

Jergens Table of Contents
Master Table of Contents
Home