Reduce set up times and increase production on those small production jobs. The pallets can be reused for those repeat jobs.
Now you can run those fixture jobs without removing your vises.
These Vise Pallets are designed to fit in all 6 inch vises and measure approximately 6x8 and 6x10 inches.
They are available blank and with t-slots.
The Blank Pallets are ideal for multiple small parts using the Mitee-Bite Fixture Clamps or Uniforce Clamps.
The T-Slot Pallets can be used with our T-Slot Clamps or the versatile 3/8 Riser Kit (#21688) for
non-dedicated applications.
The Vise Pallets are qualified in 2 places so they can rest on parallels or on top of the jaws.
HOW TO USE
The Mitee-Bite Vise Pallet has a locating pin that makes contact with left side of the solid jaw for repeat location of pallet.
Simply slide pallet to the right of the vise and clamp in place. Pallets can be machined and tapped as required. The T-Slot Pallets
add versatility when using the riser kit to hold the parts. Indicate the rail in the center of the pallet and adjust the clamps along
the t-slots for the specified work piece.
Part Number
A
B
C
D
T-Slot Size
T-Slot Spacing
24100
6.00
8.00
.95
.44
Blank
Blank
24120
6.00
10.00
.95
.44
Blank
Blank
24150
6.30
8.00
1.15
.44
3/8
1.56
24170
6.30
10.00
1.15
.44
3/8
1.56
21688
Double Riser Kit for holding 2 or 4 pieces on T-Slot Pallets
