OK-VISE CLAMPS
Accurate machining demands a clamp which is completely free of play. THe OK-Vise achieves this by its cross-wedge construction, which allows the OK-Vise to lock firmly in every direction as it is tightened down.

High quality, low profile OK-Vise Clamps are small in design, but giants in performance. Jaws can be machined to suit the geometry of the workpiece.
Single-wedge
OK-Vise low
profile clamps
are completely
free of play.		 Double-wedge
OK-Vise low
profile clamps
have a pull down
action towards
the workpiece.
SINGLE-WEDGE OK-VISE CLAMPS
Part No. Model Min. A
Optimum		 Max B C D E F Mounting Screw
(included)		 Pressing Force
of Jaws, lbs.		 Hardness of
Jaws HRC
47110* BK2-VT-S 1.06 1.14 1.22 1.14 .59 .83 .10 .040 5/16 - 18 x 3/4 3300 48-52
47115 BK2-VT 1.06 1.14 1.22 1.14 .59 .83 .10 .040 5/16 - 18 x 3/4 3300 48-52
47130 DK2-VTI 1.65 1.77 1.93 1.61 .87 1.18 .16 .080 1/2 - 13 x 1 1/4 6600 48-52
47160 FK2-VT 2.24 2.40 2.60 2.20 1.14 1.65 .20 .120 5/8 - 11 x 1/2 13200 48-52
* Part number 47110 end of jaws are smooth.
DOUBLE-WEDGE OK-VISE CLAMPS
Part No. Model Min. A
Optimum		 Max B C C1 D E F Mounting Screw
(included)		 Pressing Force
of Jaws, lbs.		 Hardness of
Jaws HRC
47150 DK2-WTI 1.65 1.77 1.93 1.61 1.42 1.18 1.18 .20 .080 1/2 - 13 x 1 1/2 11000 48-52
47180 FK2-WT 2.24 2.40 2.64 2.20 1.97 1.65 1.65 .20 .120 5/8 - 11 x 21/4 19800 48-52
MACHINABLE SINGLE-WEDGE OK-VISE CLAMPS
Items below are machinable.
Part No. Model Min. A
Optimum		 Max B C D E F Mounting Screw
(included)		 Pressing Force
of Jaws, lbs.		 Hardness of
Jaws HRC
47120* BK2-VT-S+3 1.30 1.38 1.46 1.14 .59 .83 .10 .040 5/16 - 18 x 3/4 3300 30-34
47140 BK2-VTI-S+5 2.05 2.17 2.32 1.61 .87 1.18 .16 .080 1/2 - 13 x 11/4 6600 30-34
47170 FK2-VT+5 2.64 2.80 2.99 2.20 1.14 1.65 .20 .120 5/8 - 11 x 11/2 13200 30-34
* Part number 47120 end of jaws are smooth.

MITEEBITE PRODUCT INDEX
MASTER PRODUCT INDEX
HOME