MONO-BLOC CLAMPS The Mono-Bloc clamp is the quickest and easiest way to clamp parts on a Bridgeport-type mill! One of the fastest and strongest milling clamps available anywhere. Modular design: Start with two clamps and build up with risers. Clamps are easily set up and broken down, making them ideal for odd-shaped parts and short cycle times. Worm-and-gear design ensures that the clamp will not loosen with use. Up to 12" clamping height with riser blocks. WITH REGULAR ARM Clamping Range 0-4" 2,400 lbs. clamping force when tightened to a torque of 58 ft. lbs. Clamping Range 0-5 1/2" 1,300 lbs. clamping force when tightened to a torque of 58 ft. lbs. PRECISION WORM AND GEAR MECHANISM #1 SWIVEL SHOE T-WRENCH When holding the workpiece, the worm can turn the gear but the gear cannot turn the worm. Thus, the clamp cannot loosen. Light alloy swivel shoe provides protection against marring workpiece. It is removable and free to swivel. It is secured by spring-loaded balls and a variety of shoes are available. 8mm hex bal is used to tightened Mono-Bloc to riser or to table; socket is used to clamp workpiece. HOW THE MONO-BLOC CLAMPS WORK Slide T-Nut and screw into approximate position. Slide riser block (or Mono-Bloc) over M-10 screw. Tighten M-10 screw through opening in riser block with T-wrench. Slide Standard-Duty Mono-Bloc over M-10 screw on riser block Tighten M-10 screw on riser block with T-wrench through clearance on Mono-Bloc. Clamp the part. Range is 3" to 6". Add up to three riser blocks to clamp parts up to 12" high. STANDARD-DUTY MONO-BLOCK CLAMPS DELUXE MONO-BLOCK START-UP KIT Part Number Description 25705 Standard-Duty Mono-Bloc w/ 2 5/8" Arm (includes T-wrench) 25710 Standard-Duty Riser Block 25515 Replacement Swivel Shoe 25720 T-Wrench for Standard-Duty Mono-Bloc 25540 Extension Arm Part Number T-Slot Size 25727 9/16" 25729 5/8" 25731 3/4" SPECIAL SCREWS & T-NUTS FOR MONO-BLOC (Order one screw and one nut per Mono-Bloc) CONTENTS OF STARTER KIT Part Number Description 25730 M-10 x 35mm Screw for 9/16" T-Nut 25733 M-10 x 40mm Screw for 5/8" & 3/4" T-Nut 25736 M-10 x 45mm Screw for 13/16" & 7/8" T-Nut 25748 9/16" x M-10 T-Nut 25751 5/8" x M-10 T-Nut 25754 3/4" x M-10 T-Nut 25757 13/16" x M-10 T-Nut 25760 7/8" x M-10 T-Nut Part Number T-Slot Size 25705 2 Standard-Duty Mono-Blocks w 2 5/8" Arm 25710 2 Standard-Duty Riser Blocks 25540 1 Extension Arm 25720 1 Standard-Duty T-Wrench 25730 2 M-10 x 35mm Screws 25733 2 M-10 x 40mm Screws   2 T-nuts (See chart above) Kit includes high-impact plastic storage/carrying case with room to store above tools and space to store additional T-nuts for other size mills. REPLACEMENT SWIVEL SHOES Shoes #2 & 3 give you a larger clamping surface - Shoes # 4 & 5 are for holding round work pieces. Part Number T-Slot Size 25518 #2 (Yellow) 25520 #3 (White) 25522 #4 (Red) 25524 #5 (Blue) 25530 Set of 4 (#2, 3, 4, 5)

MITEEBITE PRODUCT INDEX
MASTER PRODUCT INDEX
HOME