 |
|
|
|
|
|
| MACHINABLE FIXTURE CLAMPS |
|
|
|
 |
These clamps, with the machinable steel washers, provide more
flexibility for holding round or unusual shaped parts. Parts can be held directly to the fixture plate surface or elevated for through-drilling.
A special screw is provided with each package to hold the washer in the proper place during machining.
The flat edge is the same location as our original fixture clamp. It can be used where a stronger clamping surface is required.
- Low profile
- Made of mild steel for machinability
|
 |
|
| Part No. |
A |
B |
C |
D |
E |
F |
G* |
H+ |
Max.
Holding
Force(N) |
No. of
Clamps
per Pack |
|
| 50506 |
M6 |
4M |
1.01 |
24.9 |
6.4 |
11.9 |
6.4 |
7.8mm |
3355 |
4 |
| 50510 |
M10 |
7M |
1.52 |
31.2 |
8.9 |
18.0 |
7.0 |
10.2mm |
8895 |
4 |
| 50512 |
M12 |
8M |
2.03 |
37.6 |
11.4 |
22.9 |
7.6 |
12.7mm |
17790 |
4 |
| 50516 |
M16 |
12M |
2.54 |
43.9 |
14.0 |
28.6 |
8.9 |
15.0mm |
26680 |
4 |
|
* G is the amount of machinable stock.
+ H is the distance to drill & tap hole from edge of workpiece to use flat face.
** Every package includes one machining screw.
|
|
 |
