TOLL FREE 888-869-2424

InnerLock Jaw Plates
IL_01.TIF IL_01.TIF
With the InnerLock jaw plates, it takes only 40 seconds to change. By minimizing down-time, the unique reversible feature saves you money on the jaw plates. Each jaw plate can be mounted in two directions, giving you two jaw plates for the price of one. For instance, the plain jaw plate when in the inverted position has a step for holding small parts closer to the spindle. Our small through-hole design allows for greater gripping surface.
IL_02.TIF IL_03.TIF IL_04.TIF
Individual Jaws 4" Vise 6" Vise 8" vise
Jaw Type Part # Ship Wt. Part # Ship Wt. Part # Ship Wt.
SINGLE STEP AJ400-32 1 Lb. AJ600-32 2 Lbs. AJ800-32 6 Lbs.
DOUBLE STEP AJ400-236 1 Lb. AJ600-236 2 Lbs. AJ800-236 5 Lbs.
ALUMINUM AJ400-234 1 Lb. AJ600-234 1 Lb. AJ800-234 2 Lbs.
SEMI-HARD STEEL (4150) AJ400-235 1 Lb. AJ600-235 3 Lbs. AJ800-235 7 Lbs.
SERRATED AJ400-47 1 Lb. AJ600-47 2 Lbs. AJ800-47 6 Lbs.
V JAW HARDENED & GROUND AJ400-237 2 Lbs. AJ600-237 5 Lbs. AJ800-237 10 Lbs.
DISPLAY BOARD AJ400-238 11 Lbs. AJ600-238 11 Lbs. AJ800-238 11 Lbs.
BOLTS-D (4) PIECES 00-3353   00-3417   00-3481  
BOLTS-PT (4) PCS. 00-3353   00-3417   00-3481  
BOLTS-DL (4) PCS. 00-3348   00-3412      
BOLTS-DL (4) PCS. 00-3353   00-3417      

INNERLOCK JAW PLATE DIMENSIONS
Part # Aluminum Soft Steel Plain & Step
W L H W L H W L H STEP
AJ400 0.730 3.969 1.374 0.730 3.969 1.374 0.57 3.969 1.374 0.125
AJ600 0.9810 5.969 1.880 1.125 5.969 1.880 0.725 5.969 1.880 0.188
AJ800 1.230 7.969 2.440 1.230 7.969 2.440 1.075 7.969 2.440 0.250

INNERLOCK JAW PLATE DIMENSIONS
Part # Double Step Serrated V-Jaw
W L H ST 1 ST 2 W L H W L H SM 0 LG 0
AJ400 0.547 3.969 1.374 0.250 0.500 0.547 3.969 1.374 1.125 3.969 1.374 0.100 1.500
AJ600 0.735 5.969 1.880 0.375 0.750 0.725 2.969 1.880 1.880 5.969 1.880 1.125 3.000
AJ800 1.075 7.969 2.440 0.500 1.000 1.075 7.969 2.440 2.375 7.969 2.440 0.150 4.500

Kits available - consult factory, InnerLock jaws require low silhouette SHCS

Standard Individual Jaw Plates

Part # Dim "A" Dim "B" Dim "C" Dim "D" Description
60-32-1 1.693 .725 1.880 .610 STEPPED JAW
60-236-1 1.505 .725 1.880 .610 STEPPED JAW
60-236-2 1.130 .725 1.880 .610 STEPPED JAW
*60-234-1 NONE .980 1.880 .980 ALUMINUM
*60-235-1 NONE 1.125 1.880 1.125 STEEL
60-237-1 NONE 1.875 1.635 1.875 V JAW
LP60-32 1.469 .725 1.635 .610 STEPPED JAW
*60-47-1 NONE .725 1.735 .725 SERRATED JAW
*60-47-2 NONE .725 1.880 .725 SERRATED JAW
Jaw Type 4" Vise 6" Vise
Part # Wt. Part # Wt.
HARDENED D40-7 1 Lb. D60-7 2 Lbs.
SOFT D40-7-SOFT 1 Lb. D60-7-SOFT 2 Lbs.
STEPPED See InnerLock See InnerLock
SERRATED See InnerLock See InnerLock

Jaw Type 8" Vise 10" Vise
Part # Wt. Part # Wt.
HARDENED D80-7 5 Lbs. D100-7 6 Lbs.
SOFT D80-7-SOFT 5 Lbs. D100-7-SOFT 6 Lbs.
STEPPED See InnerLock D100-32 6 Lbs.
SERRATED See InnerLock D100-47 6 Lbs.

*60-234-1 is a carve your own pocket jaw plate
*60-235-1 is a carve your own pocket jaw plate
*60-47-1 Serrations are aggressive, cut to points will mark part
*60-47-2 Serrations in both directions to .050 flats

4" & 6" Magnetic Jaw Plates

MAGJAW_1.TIF

Features powerful rare earth magnets for holding parallels securely in place, leaving hands free to hold and clamp the workpiece. Fast and accurate set ups. US Patent #6,361,034


MAGJAW_1.TIF
4" AND 6" MAGNETIC JAW PLATES
Part # Description Length Width Height
D40-7-SAMAG 4" Magnetic Jaw Plate 3.969 .547 1.235
D40-315-SAMAG 4" Magnetic Jaw Plate Accepts Groove Lock Workstops 3.969 .725 1.235
D60-7-SAMAG 6" Magnetic Jaw Plate 5.969 .725 1.735
D60-315-SAMAG 6" Magnetic Jaw Plate Accepts Groove Lock Workstops 5.969 .725 1.735

Groove Lock Reversible Style Step Jaw Plates
REVJAW_2.TIF
REVERSIBLE STYLE STEP JAW PLATES
Vise Size Part # Dim "A" Dim "B" Dim "C" Dim "D" Dim "E"
2" CL2-316 .740 .615 .647 .547 1.950
4" D40-316 1.374 1.250 .672 .547 3.969
6" D60-316 1.880 1.700 .735 .547 5.969

Machinable Aluminum Jaw Plates For All Kurt 6" Vises

XJAB6A_2.TIF
XJAB6A-321
  • 6" Aluminum (6061-T6) soft jaw. Fits all Kurt 6" vises by utilizing jaw plate "T" slot shim (XJA6-55).
  • Reversible top to bottom.
  • Extra thickness for carving part shapes into jaw plate.
  • Can be used on EZLock jaw system.
  • 5.969" L x 1.500" W x 1.874" H

XJAB6A_1.TIF
XJAB6A-318
  • 6" Aluminum (6061-T6) soft jaw. Fits all Kurt 6" vises.
  • Reversible top to bottom and front to back, (Counter bore both sides).
  • Extra thickness for carving part shapes into jaw plate.
  • 5.969" L x 1.500" W x 1.874" H.

XJAB6A_3.TIF

Noodle Jaw™ XJAB6A-325
  • 6" Aluminum (6061-T6) soft jaw. Fits all Kurt 6" vises by utilizing jaw plate “T” slot shim (XJA6-55).
  • Can be used on EZLock jaw system.
  • Jaw plate has .25" grooves for insertion of polyurethane rod. Polyurethane rod sections can be cut to length of workpiece.
  • Use jaw plate on movable jaw block.
  • 5.969" L x 1.125" W x 1.874" H.
  • Three hardness grades of polyurethane available:
    Item UBERD025 - Red urethane - 95A Shore Hardness.
    Item UBURD025 - Blue urethane - 90A Shore Hardness.
    Item UORRD025 - Orange urethane - 80A Shore Hardness.
  • Caution: Solution for light clamping only

XJA6_55.TIF
XJA6-55 Jaw Plate “T” slot shim
  • Can be used on all Kurt 6" vises.
  • Allows use of horizontal T-slot jaw plates (XJAB6A-321, XJAB6A-325).
  • Requires low head, socket head cap screws (00-3417).
  • No need to remove bolt to change jaw plates.

EZLock™ Vise Jaw Systems

Quick change accessory jaw system for new 6" CarvLock vise and 6" Fixture Vise

55 Second Jaw Changes

 EZLOCK_1.TIF EZLOCK_2.TIF EZLOCK_3.TIF
DLU_EZL.TIF DU68EZL.TIF

CarvLock DLU6EZL-Jaw Kit New EZLock Jaw Plate System

Fixture Vise DU68EZL - Jaw Kit Quick Change, EZLock Jaw Plate System
 
DLU6_05.TIF DU68_06.TIF

CarvLock DLU6 - Vise Base

Fixture Vise DU68 Vise Base

Another option is an EZLock system that allows quick changing of hard or soft jaw plates by loosening them from the top of the vise. The vise opening does not need to be increased from its last unclamped position to change the jaw plates. This means the last part machined can be unclamped and the jaw plate removed in one motion. The typical time to go through the entire sequence of removing and reinstalling a standard set of two jaw plates is 4 minutes and 20 seconds. The same effort with the EZLock takes 55 seconds. Each jaw plate change will save $4.55 at a shop rate of $80 per hour. The EZLock design features a bottom registration pin that is spring loaded so that the jaw plate always locates on the same side as the pin. This method locates the jaw plate within a few tenths. US Patent #6,217,014

EZLock Replacement Jaw Plates
DLU6_05.TIF
EZL6-315
  • Case hardened 6" jaw plate designed for EZLock jaw system.
  • Accepts Kurt Groove Lock workstops.
  • Unique jaw locating groove assures repeatability of .0005" or less in repeat set-ups.
  • 5.969" L x .725" W x 1.735" H
DLU6_05.TIF
EZL6-32
  • Case hardened 6" jaw plate designed for EZLock jaw system.
  • Reversible for use without step or with step (.125 x .125).
  • Accepts Kurt Groove Lock workstops.
  • Unique jaw locating groove assures repeatability of .0005" or less in repeat set-ups.
  • 5.969" L x .831" W x 1.875" H
DLU6_05.TIF
EZL6-316
  • Case hardened 6" jaw plate designed for EZLock jaw system.
  • Precision ground step jaw (.0625" x .0625").
  • Accepts Kurt Groove Lock workstops.
  • Unique jaw locating groove assures repeatability of .0005" or less in repeat set-ups.
  • 5.969" L x .725" W x 1.735" H
 

KURT PRODUCT INDEX
MASTER PRODUCT INDEX
HOME