 - Hand Operated Jigs
 - Air Operated Jigs
|
- Designed for precision cross-hole drilling of round or
hexagon stock.
- Clamping plate quickly adjusts to the size of the workpiece.
An easy
- press on the locking lever of the hand-operated units,
or actuating
- the air valve of the air-operated jigs, pulls the clamping
plate down
- against the workpiece, with a travel of 3/64". Flick
the lever to vertical
- position, or release the foot or hand valve, and the
part can be removed. An adjustable stop, with 9" long rod for locating
work longitudinally, is furnished for use on either side of the jig.
- Drills are guided by A.S.A. slip fit, "SF", bushings fitted into
adapter liners in
- the clamping plate. Bushings are held in position by
an adjustable lock screw. Plate is held in alignment and positioned by
hardened and ground guide pins and locking plunger. The adapter liner in
- the clamping plate is accurately centered, within a tolerance
of .001", above the hardened and ground 60º V-Block.
|
