The 640-404 Multi Collet
Chuck Block was designed to be used either with a rotary
indexer or as a stand alone collet fixture, mounted in a
milling vise or similar type fixture. Four, manually
operated "dead-lenght" 5C collet chucks are incorporated
into the block. A simple 90° turn of each operating cam
collapsing the collet sleeve, will activate the collet
mechanism, with zero part movement when clamped. Each
collet block comes complete with a flange plate for
rotary table use.
5C MULTI
COLLET CHUCK BLOCK
TECHNICAL DATA:
Repeatability:
0.0002" (0.005mm)
Block
material:
Mehanite cast iron
Squareness:
0.0004" (0.01mm)
Parallelism:
0.0003" (0.007mm)
Flatness:
0.0004" (0.01mm)
Gripping force:
400 lbs. (181 kg)
QCS Workholding LLC
10635 Tower Oaks Boulevard Suite E
Houston Texas 77070
Toll Free (888) 869-2424
workholding@hotmail.com
Site Map
Copyright 2016 QCS Workholding LLC
All Rights Reserved
