ONE STOP WORKHOLDING
BALL LOCK AND LITE LOCK MOUNTING SYSTEMS
Ball Lock Shanks
|
|
||||||||
| Shank Part Number |
Fixture Plate Thickness -0.005 |
Shank Diameter (mm) |
Maximum Holddown Force (Lbs.) |
Maximum Screw Torque (Ft/Lb) |
Hex Wrench Size For Set Screw |
Repair Kit Part Number | |||
| A | B | C | D | E | |||||
| 49605 | .50 | 13 | .25 | .87 | 1.08 | 750 | 1.2 | 3/32 | 49905 |
| 49606 | .75 | 13 | .25 | .87 | 1.33 | 750 | 1.2 | 3/32 | 49906 |
| 49607 | .50 | 16 | .32 | 1.50 | 1.15 | 12000 | 3 | 1/8 | 49907 |
| 49608 | .75 | 16 | .32 | 1.50 | 1.40 | 1200 | 3 | 1/8 | 49908 |
| 49601 | .75 | 20 | .38 | 1.75 | 1.53 | 3000 | 4 | 1/8 | 49901 |
| 49602 | 1.00 | 20 | .38 | 1.75 | 1.78 | 3000 | 4 | 1/8 | 49902 |
| 49611 | .75 | 25 | .38 | 2.00 | 1.70 | 7000 | 9 | 5/32 | 49911 |
| 49612 | 1.00 | 25 | .38 | 2.00 | 1.95 | 7000 | 9 | 5/32 | 49912 |
| 49621 | .75 | 30 | .50 | 2.25 | 1.88 | 10000 | 15 | 3/16 | 49921 |
| 49622 | 1.00 | 30 | .50 | 2.25 | 2.13 | 10000 | 15 | 3/16 | 49922 |
| 49631 | .75 | 35 | .50 | 2.25 | 1.97 | 15500 | 25 | 1/4 | 49931 |
| 49632 | 1.00 | 35 | .50 | 2.25 | 2.22 | 15500 | 25 | 1/4 | 49932 |
| 49633 | 1.50 | 35 | .50 | 2.25 | 2.72 | 15500 | 25 | 1/4 | 49933 |
| 49634 | 2.00 | 35 | .50 | 2.25 | 3.22 | 15500 | 25 | 1/4 | 49934 |
| 49641 | .75 | 50 | .75 | 3.00 | 2.45 | 20000 | 50 | 3/8 | 49941 |
| 49642 | 1.00 | 50 | .75 | 3.00 | 2.70 | 20000 | 50 | 3/8 | 49942 |
| 49643 | 1.50 | 50 | .75 | 3.00 | 3.20 | 20000 | 50 | 3/8 | 49943 |
49644 |
2.00 | 50 | .75 | 3.00 | 3.70 | 20000 | 50 | 3/8 | 49944 |
Material: Shank/Bushing, 4340
Finish: Black Oxide
Heat Treat:
Shanks, Rc 40-45
Bushings, RC 50-54
Liners, RC 62-64
Available in Hi-Temp Sizes (800oF MAX)
Any Ball Lock application requires at least two sets of shanks, receiver bushings and liners. The liners are placed into the fixture plate to insure extremely accurate positioning. If more than two shanks are required (to provide additional hold down force), omit the liner bushing so that these additional holes will not interfere with your primary locating holes.
|
Each Ball Lock
Repair Kit Includes:
|
