|
|
|
|
|
|
| Item | Description | Spindle | O.A.L. | Flange | Nose | Cap. |
|
S15 (H) (Utilizes standard S15 collet Pads) |
"A" | "B" | "C" | |||
| 41550-C07 | A5-S15H | A2-5 | 5.500 | 6.450 | 3.375 | 1.500 |
| 41560-D06 | A6-S15H | A2-6 | 6.750 | 7.450 | 3.375 | 1.500 |
| 415140-B190 | 140 MM-S15H | 140 MM | 5.750 | 6.450 | 3.375 | 1.500 |
|
S 20 (H) (Utilizes standard S20 collet pads) |
||||||
| 42050-C05 | A5-S20H | A2-5 | 5.625 | 6.450 | 4.500 | 2.000 |
| 42060A-D05 | A6-S20HS | A2-6 | 5.575 | 7.450 | 4.400 | 2.000 |
| 42080A-D07 | A6-S20H | A2-6 | 6.750 | 7.450 | 4.400 | 2.000 |
| 42080A-B13 | A8-S20H | A2-8 | 7.025 | 9.450 | 4.400 | 2.000 |
| 420140-B195 | 140 MM-S20H | 140 MM | 5.275 | 6.450 | 4.400 | 2.000 |
|
S22 (H) (Utilizes standard S22 collet pads) |
||||||
| 42260-E06 | A6-S22H | A2-6 | 7.250 | 7.450 | 5.000 | 2.250 |
| 42280-B16 | A8-S22H | A2-8 | 8.600 | 9.450 | 5.700 | 2.250 |
|
S26 (H) (Utilizes standard S26 collet pads) |
||||||
| 42660B-E03 | A6-S26H | A2-6 | 5.750 | 7.450 | 5.750 | 2.625 |
| 42680B-C16 | A8-S26HS | A2-8 | 5.750 | 9.450 | 5.750 | 2.625 |
| 42680B-D16 | A8-S26H | A2-8 | 7.000 | 9.450 | 5.750 | 2.625 |
|
S30 (H) (Utilizes standard S30 collet pads) |
||||||
| 43060-E08 | A6-S30H | A2-6 | 6.375 | 7.450 | 5.750 | 2.625 |
| 43080A-E15 | A8-S30HS | A2-8 | 6.525 | 9.450 | 5.750 | 2.625 |
| 43080A-K05 | A8-S30H | A2-8 | 7.675 | 9.450 | 5.750 | 2.625 |
|
S35 (H) (Utilizes standard S35 collet pads) |
||||||
| 43580-C300 | A8-S35HS | A2-8 | 6.750 | 9.450 | 7.000 | 3.500 |
| 435FN-F14 | F/N-S35H (1) | A2-6/8 | 6.250 * | ** | 7.000 | 3.500 |
| 435FN-F14 | F/N-S35H (1) | A2-6/8 | 6.250 * | ** | 7.000 | 3.500 |
|
S40 (Utilizes standard S40 collet pads) |
||||||
| DAE44011-DAE | A11-S40H | A2-11 | 7.500 | 11.500 | 7.900 | 4.000 |
| 440FN-K20 | F/N-S40H (1) | A2-8/11 | 7.600 * | ** | 8.200 | 4.000 |
|
S50 (H) (Utilizes standard S50 collet pads) |
||||||
| 45011-k25 | A11-S50H | A2-11 | 10.750 | 11.450 | 10.500 | 5.000 |
| H - Hardinge | HS - Hardinge (short) | BB - Big Bore |
| (*) 6250 (without
mounting plate), O.A.L. depends on the spindle and/or drawtube. (*) 7.600 (without mounting plate), O.A.L depends on the spindle. (**) Flange diameter varies with mount. (1) FLAT NOSE (F/N) CHUCK - Must be used with mounting plates. |
| Item # | Description | Spindle | O.A.L. | Flange | Nose | Cap. |
|
S15 (W) (Utilizes Warner & Swasey S15 collet pads) |
||||||
| 41550W-A08 | A5-S15W | A2-5 | 5.500 | 6.450 | 3.370 | 1.500 |
| 41560W-B09 | A6-S15W | A2-6 | 6.750 | 7.450 | 3.370 | 1.500 |
|
S20 (W) (Utilizes Warner & Swasey S20 collet pads) |
||||||
| 420050W-C09 | A5-S20W | A2-5 | 5.625 | 6.450 | 4.500 | 2.000 |
| 42060W-D09 | A6-S20W | A2-6 | 6.750 | 7.450 | 4.400 | 2.000 |
| 42080W-B15 | A8-S20W | A2-8 | 8.250 | 9.450 | 4.400 | 2.000 |
|
S26 (W) (Utilizes Warner & Swasey S26 collet pads) |
||||||
| 42660W-A07 | A6-S26W | A2-6 | 6.250 | 7.450 | 5.750 | 2.625 |
| 42680W-C295 | A8-S26W | A2-8 | 7.500 | 9.450 | 5.750 | 2.625 |
| 42680W-C15 | A8-S26WS | A2-8 | 6.250 | 9.450 | 5.750 | 2.625 |
| W- Warner & Swasey | WS Warner & Swasey (short) |
|
||||
|
|||||||||
