Vacuum Workholding Technology

TOLL FREE 888-869-2424 U. S. ONLY
ALL OTHERS 713-462-1053

Part Number	Description
VUL-812SS	Overall dimension is 8” wide by 12” long by 1-1/2” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1” centers. The chuck will have one (1) vacuum inlet with two (2) threaded ports. The standard mounting is T-slot groove.
VUL-818SS	Overall dimension is 8” wide by 18” long by 1” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1” centers. The chuck will have one (1) vacuum inlet with two (2) threaded ports. The standard mounting is T- slot groove.
VUL-824SS	Overall dimension is 8” wide by 24” long by 1-1/2” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1” centers. The chuck will have one (1) vacuum inlet with three (3) threaded ports. The standard mounting is T- slot groove.
VUL-830SS	Overall dimension is 8” wide by 30” long by 1-1/2” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1” centers. The chuck will have one (1) vacuum inlet with four (4) threaded ports. The standard mounting is T- slot groove.
VUL-1020SS	Overall dimension is 10” wide by 20” long by 1-1/2” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1” centers. The chuck will have one (1) vacuum inlet with three (3) threaded ports. The standard mounting is T- slot groove.
VUL-1024SS	Overall dimension is 10” wide by 24” long by 1-1/2” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1” centers. The chuck will have one (1) vacuum inlet with three (3) threaded ports. The standard mounting is T- slot groove.
VUL-1030SS	Overall dimension is 10” wide by 30” long by 1-1/2” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1” centers. The chuck will have one (1) vacuum inlet with four (4) threaded ports. The standard mounting is T- slot groove.

Vacuum Workholding Technology

Single-Station Vacuum Chucks

Special VUL-612SS Single-Station Rectangular Vacuum Chuck with dowel pins for location

VACUUM CHUCKS -- Single-Station Rectangular Vacuum Chucks

Part Number Description

VUL-608SS Overall dimension is 6” wide by 8” long by 1-1/2” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1/2” centers. The chuck will have one (1) vacuum inlet with one (1) threaded port. The standard mounting is T-slot groove.

VUL-612SS Overall dimension is 6” wide by 12” long by 1-1/2” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1/2” centers. The chuck will have one (1) vacuum inlet with two (2) threaded ports. The standard mounting is T- slot groove.

VUL-618SS Overall dimension is 6” wide by 18” long by 1-1/2” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1/2” centers. The chuck will have one (1) vacuum inlet with two (2) threaded ports. The standard mounting is T- slot groove.

VUL-624SS Overall dimension is 6” wide by 24” long by 1-1/2” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1/2” centers. The chuck will have one (1) vacuum inlet with three (3) threaded ports. The standard mounting is T- slot groove.

Special VUL-1224SS Single-Station Rectangular Vacuum Chuck with T-Slot mounting and eight (8) vacuum ports

VACUUM CHUCKS -- Single-Station Rectangular Vacuum Chucks

Part Number Description

VUL-812SS Overall dimension is 8” wide by 12” long by 1-1/2” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1” centers. The chuck will have one (1) vacuum inlet with two (2) threaded ports. The standard mounting is T-slot groove.

VUL-818SS Overall dimension is 8” wide by 18” long by 1” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1” centers. The chuck will have one (1) vacuum inlet with two (2) threaded ports. The standard mounting is T- slot groove.

VUL-824SS Overall dimension is 8” wide by 24” long by 1-1/2” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1” centers. The chuck will have one (1) vacuum inlet with three (3) threaded ports. The standard mounting is T- slot groove.

VUL-830SS Overall dimension is 8” wide by 30” long by 1-1/2” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1” centers. The chuck will have one (1) vacuum inlet with four (4) threaded ports. The standard mounting is T- slot groove.

VUL-1020SS Overall dimension is 10” wide by 20” long by 1-1/2” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1” centers. The chuck will have one (1) vacuum inlet with three (3) threaded ports. The standard mounting is T- slot groove.

VUL-1024SS Overall dimension is 10” wide by 24” long by 1-1/2” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1” centers. The chuck will have one (1) vacuum inlet with three (3) threaded ports. The standard mounting is T- slot groove.

VUL-1030SS Overall dimension is 10” wide by 30” long by 1-1/2” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1” centers. The chuck will have one (1) vacuum inlet with four (4) threaded ports. The standard mounting is T- slot groove.

All vacuum chucks come standard without locating or supporting pins. The customer will be responsible for installation and “grinding-in” of the vacuum chuck surface.
Most products are custom-made and take from one (1) week to four (4) weeks.

VAC-U-LOK PRODUCT INDEX
MASTER PRODUCT INDEX
HOME

Part Number	Description
VUL-608SS	Overall dimension is 6” wide by 8” long by 1-1/2” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1/2” centers. The chuck will have one (1) vacuum inlet with one (1) threaded port. The standard mounting is T-slot groove.
VUL-612SS	Overall dimension is 6” wide by 12” long by 1-1/2” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1/2” centers. The chuck will have one (1) vacuum inlet with two (2) threaded ports. The standard mounting is T- slot groove.
VUL-618SS	Overall dimension is 6” wide by 18” long by 1-1/2” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1/2” centers. The chuck will have one (1) vacuum inlet with two (2) threaded ports. The standard mounting is T- slot groove.
VUL-624SS	Overall dimension is 6” wide by 24” long by 1-1/2” thick. The groove pattern will be 1/8” wide by 1/4” deep on 1/2” centers. The chuck will have one (1) vacuum inlet with three (3) threaded ports. The standard mounting is T- slot groove.