AND     
TOLL FREE 888-869-2424

KURT PRECISION VISE COMPLETE WITH J-LOC QUICK CHANGE VISE JAWS
CHANGE JAW SURFACES IN 10 SECONDS OR LESS!
.0005" REPEATABLE ACCURACY


BUILD WHOLE FIXTURES ON INSERTS IN CHANGE THEM OUT
 IN 10 SECONDS OR LESS WITH .0005" REPEATABLE ACCURACY!
 

MACHINE SPECIAL PARALLELS AND
CHANG OUT QUICKLY!

BUILD FIXTURES ON INSERTS
AND SWITCH OUT FAST!

MACHINE V-BLOCKS IN INSERTS
AND CHANGE OUT IN A FLASH!


ADVANTAGES OF THE J-LOC QUICK CHANGE VISE JAW SYSTEM
  1. ECONOMICAL INSERTS
  2. SAVES SET UP TIME
  3. INSERTS ARE REUSABLE WITH REPEATABLE ACCURACY OF .0005" T.I.R.
  4. SIMPLE PATENTED USER FRIENDLY DESIGN
    BOLT ON LIKE ANY OTHER REPLACEMENT JAW

JAW FEATURES

         10 SECOND OR LESS JAW CHANGE OUT
         .0005" T.I.R. REPEATABLE ACCURACY
         BOLT ON LIKE STANDARD SOFT JAWS
         INSERTS ARE REVERSIBLE FOR GREATER ECONOMY

INSERT FEATURES

  1. SOFT, EASY TO MACHINE
  2. MAY BUILD FIXTURE ON INSERTS AND CHANGE OUT FIXTURES
  3. AVAILABLE IN MILD STEEL OR ALUMINUM
  4. REVERSIBLE FOR GREATER ECONOMY
  5. HELD SECURELY IN PLACE BY A CONE POINT LOCK SCREW AND SOLID LOCK PIN

D 675 KURT VISE FEATURES

         Powder coat paint resists peeling.
         Machined rail allows precision alignment.
         A 7-1/2" jaw opening.
         Stationary jaw features an integral key and larger fasteners that reduces deflection by 50%.
        SPECIAL PRICE FOR PACKAGE WITH D675 KURT VISE IS $749.75.00 u. S.  (See below for package details)

D688 KURT VISE FEATURES
          Large 8.8 inch jaw opening.
          Outside rail edges of the body are machined.
          Vise nut does not extend beyond the end of the vise body.
          D688 has the same footprint as the D675 vise. Distance from keyway to stationary same as D675.
          Groove Lock jaw (D60-315) and workstop (WSRL46) standard.
          Patented "O"ring pull down feature standard.
          Approximately a 20% increase in clamping pressure over D675 vise.
          Distinctive patented design of the "Kurt Look".
          Patented AngLock design.
          Bed height matched to size 2.875" (73.025 mm) ±.0005".
          Repeatability within .001".
          Sealed needle thrust bearing used at hex end of screw to reduce clamping friction.
          SPECIAL PRICE FOR PACKAGE WITH D675 KURT VISE IS $817.87.00 u. S.  (See below for package details)   
         

 

J-LOC JLKT6F MASTER JAW DIMENSIONS


 

J-LOC INERT DIMENSIONS

J-LOC QUICK CHANGE VISE JAW INFORMATION
Inserts are reversible for maxium economy!
INSERT NUMBER "A"
DIMENSION		 MATERIAL INSERT PRICES
U.S.
JLV6 1.000 MILD STEEL 63.25
JLV6X2 2.00 MILD STEEL 75.00
JLV6A 1.000 ALUMINUM 51.75
JLV6X2A 2.00 ALUMINUM 63.25
 

KURT VISE DIMENSIONS
DIMENSIONAL DATA
  D40 D675 D688 D810 D100
A 2.250 2.875 2.875 3.310 3.875
B 4.000 6.000 6.000 8.000 10.000
C 12.340 16.750 16.810 21.810 27.500
D 2.562 3.562 3.562 4.686 5.875
E 0.500 0.688 0.688 0.813 0.813
F 1.115 1.485 1.485 1.95 3.465
G 1.355 1.980 1.980 2.450 2.950
H 1.235 1.735 1.735 2.200 2.937
J 0.547 0.725 0.725 1.075 1.320
K 4.000 4.800 4.800 6.190 8.630
L 1.281 1.540 1.540 1.865 2.225
M N/A 1.390 N/A 1.670 N/A
N 0.687 0.940 0.940 1.220 1.625
O 2.500 3.875 3.875 4.750 5.750
P 3/8-16 1/2-13 1/2-13 5/8-11 3/4-10
Q 6.380 8.750 8.750 11.500 14.500
R 5.750 8.250 8.250 11.000 13.250
S 2.625 3.813 3.813 4.940 6.188
T 0.486 6.710 5.667 8.500 10.590
U 0.531 0.656 0.320 0.880 0.940
V 0.700 2.000 1.930 2.375 1.690
W 9/16 .750 .750 .875 1
AA 3-7/8 7.5 8.8 10 9-3/4
AA MIN 0 0 0 0 0
BB 5-3/4 10.5 11.5 13.5 14
BB MIN 1.40 3.00 2.70 3.00 3.50
CC 8-7/16 13.125 14.32 17.250 19-3/4
CC MIN 4.10 5.80 5.60 5.80 9.20
DD 10-5/16 15.875 17.03 31.750 24-3/4
DD MIN 5.90 8.50 6.80 8.50 13.50
Ship Wt. 32 78 78 158 300
MANUAL VISE CLAMPING FORCE-LBS.
Torque Ft.-Lbs. D40 D675 D688 D810 D100
10 1653 989 1129    
20 2923 1776 2242 1834 1698
30 4103 2848 3337    
40 5241 3628 4148 3843 3300
50 6513 4365 5379    
60 7807 5432 6310 4349 4686
70   6111 6977    
80   6721 7968 5706 6623
100       7042 7842
120       8688 9970
140       10413 11429
160       11596 12792
180         14681
200         16163
220         18124
240         20563
260         22093
280         24077
300         26277

 


CLICK HERE FOR AN ANIMATED DEMO OF THE QUICK CHANGE SYSTEM

CLICK HERE FOR MORE INFORMATION
 

WHILE SUPPLIES LAST!

PACKAGE

PRICE
(QTY. 1) KURT VISE D675 / WITH HARD JAWS
(QTY. 2) J-LOC QUICK CHANGE MASTER  JAWS JLKT6M
(QTY. 2) V6A ALUMINUM INSERTS

NORMAL PACKAGE PRICE:  $957.30

SPECIAL PACKAGE PRICE:  $749.75
(QTY. 1) KURT VISE D688 / WITH HARD JAWS
(QTY. 2) J-LOC QUICK CHANGE MASTER  JAWS JLKT6M
(QTY. 2) V6A ALUMINUM INSERTS

NORMAL PRICE:                     $1038.40

SPECIAL PACKAGE PRICE:  $817.87

PRICES SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTIFICATION

MASTER PRODUCT LIST
HOME