HAAS21

T5C-ONE, TWO, THREE & FOUR SPINDLE CONFIGURATION
T5C (combines an)	HRT (with a)	HA5C, HA5C 2, HA5C 3, HA5C 4
SPINDLE		SPINDLE
Torque (ft-lb)	210	Torque (ft-lb)	200
(Brushless)	210	(Brushless)	300
Runout Max. (in)	0.0005	Runout Max. (in)	0.0004
Speeds (deg./sec)	0.001 to 60	Speeds (deg./sec)	0.001 to 200
Tooling	6 std T- slots @ 60 deg.	Collets	std 5C (from1/64 to 1-1/16)
Center Height (in)	6.000 +/- 0.001	Nose Thread (in.)	2 3/16-10
Brake Torque (ft-lb) @ 100 psi	200	Spindle Center (in.)	6.000
INDEXING		INDEXING
Accuracy (arc-sec)	+/- 25	Accuracy (arc-sec)	+/-60
Repeatibility (arc-sec)	10	Repeatibility (arc-sec)	10
Resolution (deg.)	0.001	Resolution (deg.)	0.001
Max. Rotation/Step (deg.)	999.999	Max. Rotation/Step (deg.)	999.999
Worm Gear Diameter (in.)	6.30	Worm Gear Diameter (in.)	2.8
Backlash (arc-sec)	30	Backlash (arc-sec)	40 HA5C (50 for 2, 3, 4)
MOTOR		MOTOR
Type	1.5 hp DC servo	Type	.5 hp DC servo
(Brushless)	1 hp AC servo	(Brushless)	.75 hp Ac servo
Gear Ratio (worm & gear)	90:1	Drive Type	worm and gear
Timing Belt	2:1	Ratio	60:1
OPERATING SPECIFICATIONS		OPERATING SPECIFICATIONS
Duty cycle full/low speed	50% / 100%	Duty Cycle	75% @ full speed
Operating Temp.	100 deg (max. ambient)	Operating Temp.	100 deg (max. ambient)
Power Required (VAC)	115 +/- 15% @ 15 amps	Power Required (VAC)	115+/- 5% @ 3 amps
Max. Air Pressure (psi)	120	Max. Air Pressure (psi)	120
WEIGHT		WEIGHT
Table (lb)	165	Rotary Head (lb.)	1-48, 2-120, 3-168, 4-250
Control (lb)	17 (2-axis) 13 (1 axis)	Control (lb)	17 (2-axis) 13 (1 axis)
(Brushless Control)	N/A (2-axis) 14.2 (1 axis)	(Brushless Control)	N/A (2-axis) 14.2 (1-axis)