TOLL FREE 1-(888)-869-2424

WORKHOLDING TOOLS
Industrial Magnetic Tools and Accessories

PERMANENT RECTANGULAR CHUCKS
 



BM62.000 Fine-pole permanent

fine-pole chuck for precision grinding & EDM

  • fine-pole with inter-pole design ensures excellent
    performance even with thin workpieces
  • fully saturating magnetic design with positive-off ensures consistent performance across entire chuck face and full release of workpiece
  • fully submersible, oil-filled construction is suitable for use in EDM baths
  • standard 5 year warrantee!
Standard sizes
CAT. NO. L   W CAT. NO. L   W
BM62.002 6" X 4" BM62.010 18" X 6"
BM62.003 8" X 4" BM62.011 16" X 8"
BM62.004 10" X 5" BM62.050 18" X 8"
BM62.006 10" X 6" BM62.012 20" X 8"
BM62.007 12" X 6" BM62.014 18" X 10"
 



BM62.100 Fine-pole EDM

fine-pole chuck with integral flushing for sinker EDM's

  • integral flushing hole system in top plate for suction or pressure flushing of erosion material
  • fine-pole with inter-pole design minimizes magnetic flux height to ensure free flushing of erosion materisal
    performance even with thin workpieces
  • fully saturating magnetic design with positive-off ensures consistent performance across entire chuck face and full release of workpiece
  • fully submersible, oil-filled construction is suitable for use in EDM baths
  • standard 5 year warrantee!
Standard sizes
CAT. NO. L   W CAT. NO. L   W
BM62.100 10" X 5" BM62.109 16" X 8"
BM62.103 6" X 6" BM62.110 18" X 8"
BM62.104 10" X 6" BM62.113 10" X 10"
BM62.105 12" X 6" BM62.114 18" X 10"
BM62.108 12" X 8"        
 





BM62.000 Fine-pole EDM

Standard-pole chuck grinding applications 

  • standard pole design ensures optimal performance for workpieces of 1/8" thichness and greater
    performance even with thin workpieces
  • fully saturating magnetic design with positive-off ensures consistent performance across entire chuck face and full release of workpiece
  • fully submersible, oil-filled construction is suitable for use in EDM baths
  • standard 5 year warrantee!
Standard sizes
CAT. NO. L   W CAT. NO. L   W
BM60.021 20" X 10" BM62.028 28" X 12"
BM62.022 24" X 10" BM62.029 32" X 12"
BM62.026 20" X 12" BM62.030 36" X 12"
BM62.027 24" X 12" BM62.031 40" X 12"
 




BM61.000 Max-pole permanent

high power chuck for heavy machining 

  • max pole design provides exceptional holding powerf - an excellent  solution for milling of a wide range of workpieces!
  • minimum workpiece thickness of 1/4" required
  • low flux penetration for free removal of chips
  • fully submersible, oil-filled construction 
  • standard 5 year warrantee!
Standard sizes
CAT. NO. L   W CAT. NO. L   W
BM61.008 16" X 8" BM61.022 20" X 12"
               
BM61.013 16" X 10" BM61.023 24" X 12"
BM61.015 20" X 10" BM61.024 32" X 12"
BM61.021 16" X 12" BM61.025 36" X 12"
   



BM68.000 Pitch-pole permanent

neodymium rare earth chuck for precision operations

  • neodymium rare earth magnetic circuit for ultra-low profile configuration - only 1.6" tall
  • pitch-pole super-fine pole design for excellent performance on small, this components 
Standard sizes
CAT. NO. L   W CAT. NO. L   W
BM68.001 6" X 4" BM68.006 10" X 6"
BM68.002 8" X 4" BM68.007 12" X 6"
BM68.003 10" X 5" BM68.010 18" X 6"
BM68.005 6" X 6"        
 


WENMAG TABLE OF CONTENTS
 MASTER TABLE OF CONTENTS
HOME